You can get the BIOS update here
http://tinyurl.com/yojar4
It's fairly safe provided that you run the NB on the Battery while Flashing the BIOS. However if the procedure stops before finishing you will most likely need a new M'Board in the NB to make it work again.
So you need to be careful. Dell has the correct warnings displayed correctly on the Above Page so you can make the decision for your self as to how safe it is.
However if you read the Manual you will clearly see that this NB only supports a Max of 1 GIG of RAM in the following configuration
Memory module capacities 64, 128, 256, and 512 MB
So you can only use 2 X 512 MEG RAM Modules. I don't think that Flashing the BIOS with the one provided by Dell will do anything to alter this either.
As you are having problems with this Current Configuration I would suggest that you [b]RTM[/b] and see that you have the correct Size & Type of RAM as if you have the wrong Type/Voltage it will not work. Look on Page 115 of the owners manual for full specifications. Flashing the BIOS in a case like this should not make any difference to this issue.
Col