Discussion Locked

Dell monitor with older power mac

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to get a Dell monitor to work with an older power Mac. It has previously worked with the Mac. It sat idle for approx. 2 wks, now the monitor comes up until the final desktop is coming up and then goes black. The Dell D828L works with my IBM pc just fine. When I put my IBM monitor on the Mac it works fine too. Just can't figure out what I need to do to the Dell monitor to get it to work with the mac again. Your help would be greatly appreciated.

6 replies

by bhbates

I suspect that the problem here is with the display prefs file. You don't mention which Mac OS you're using, but I suspect that if you're using anything after OS 8.0, you're going to see this. Start up the machine with the SHIFT key held down. This should allow you to bypass the startup routine, and use the basic display prefs. Once done, throw out the display prefs, located in the preferences folder in the system folder. If this is unsuccessful, then the parameter RAM (or PRAM) may need to be reset. To do this, start up the machine and hold down the Command(apple) key, the option key, and the "P" and "R" keys. You'll see the screen light, and hear the startup chime. Keep holding the keys down. The computer will chime again, and then again. After the third chime, release the keys and the computer will restart normally. From there you will need to reset the date, and possibly some network settings, but your monitor should be working.

by ntnab

I tried your suggestions, I had previously tried the P & R thing about 10 times. There are no display prefs in the system folder. My IBM monitor still works but NOT the Dell. Have Mac OS 9.1 installed. Any further suggestions?

This discussion is closed to new replies.