Discussion Locked

detecting modems

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
IS THERE A WAY TO FIND OUT WHAT THE MODEM IS ETC.(14.4,36.6,56K),BY PLUGING IT INTO THE BOARD.I AM RUNNING ME.I HAVE SEVERAL AND AM GOING IN CIRCLES JUST TO FIGURE ONE MODEM.A LOT OF THEM ARE ISA.I AM SLOWLEY GETTING INTO COMPUTERS,THAT IS BUILD ANDREPAIR.AS A HOBBIE.IT MAY BE SOME TIME BEFOR I TAKE ON A REPAIR JOB.

7 replies

by timthetoolman

The best way would be to look up the specs of the modem on the net. The manufacturer's website will usually have some details of what its capable of, its latest drivers etc.

You could take the opportunity to download the drivers for it while you were there and put them on floppies to be stored with the card (if you have several).

Good luck,
Tim.

by douglas_debow

No problem it's called the "AT command set".
Any good dos manual will explain the commands. and how they work. input them from termal program .
(still need com + irq setup first)

2 examples anyone can try from a windows termial

s11=40 ands10=50 this will connect to your phone line alot faster

hope this helps

by thechas

Rather than plugging them in and trying them, (a long process that will give you lots of extra files on your hard drive) you should do your best to identify the modems.

I know that many modems are poorly marked or not marked at all.
But, you should be able to identify the chipset on the modem. From this, you can determine the basic specifications.

For assistance, check out www.modemhelp.org
They can help you identify who made the modem, and find drivers and upgrades for the modems.

This discussion is closed to new replies.