Once you get inside you will realize it is not that hard. Use a digital camera and photo as you go.
Your problem is going to be building the box to create a clean enviroment.
Years ago when some drives were in the thousands instead of the hundreds we built one out of Lexan.
It looked a baby incubator. Gloves attached and all.
We used respirator filters attached to muffin fans to put a positive pressure on the box. There were four on one end. On the other end was a spring loaded flap that allowed the pressure to escape.
You put the drive, tools, and parts in the box and sealed it. Turn on all fans and wait for a while. The 4 fans would stir up and flush out all of the fine particles of dust and dirt. At least that was the theory. Once we thought it was clean we could turn off three of the fans. One would provide enough air flow to make a positive pressure.
We actually did manage to extend the life of some drives long enough to get data off of them.
What we are trying to tell you is that you are going to spend a lot of money and time to fix a 12gig drive.
The contamination that will crash a drive is not visible to the naked eye. To a drive head a human hair looks like the holland tunnel.
If you like to tinker and love a challenge go for it. Don't expect to get pop the top replace a head and get dungons and draggons going again.
Good Luck Lee