Discussion Locked

Dial-In using a LAN Modem

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a 2-Computer, peer-to-peer network that must be accessed through a LAN modem from a remote PC using it's internal modem
to dial-in to the LAN modem. I can dial-in to
the LAN modem but I cannot see the network.
I have set the remote LAN IP & remote LAN
subnet mask in the LAN modem. I have also
setup a dial-in account on the LAN modem.
What am I missing ? Should I use DNS ?

4 replies

by russ werner

Not having used a LAN modem, my question to you is this. What software is installed to permit the sharing of your resources??? I understand how one laptop modem can dial the number of a LAN modem had have it answer and the two modems talk, but you haven't mentioned any software installed to do the communications within your LAN. An example would be PCAnywhere, or a computer running a VPN connection. You have only mentioned one modem dialing and one modem answering. Maybe my lack of understanding your configuration will help you in your question?

by netman66

I understand that in order to access the LAN modem's resources, you must be running some sort of remote access software. Does Windows 98 second edition come with this software or do you have any suggestions as to what remote software would be good to use ?

This discussion is closed to new replies.