Discussion Locked

Dial up access problem

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have several toshiba laptops Joined to my domain, which use outside ISP's for dial up access. After applying the MSblaster Patch These laptops are unable to access the internet through dialup. I can successfully Ping IP Addresses over dial up connection but unable to browse pages. if unjoined from the domain, i can access isp successfully. All other brand laptops are running fine. Is there something with my win server 2000 policy settings that might be interferring somehow?

4 replies

by kwagner

It may depend on the model of Toshiba laptop. There is a fix from the Toshiba support site for some models whose internal modems had an incorrect country code programmed (Document ID: 98060010). I know it resolved a similar problem I was having with Tecras after applying MS updates.

by data knight

Sounds like a DNS/default gateway problem to me particularly as you can ping IP addresses but not browse web pages (which need DNS)

HTH

by phil

I am unable to find the patch from toshiba can you point me in the wright direction or do you have the updated patch yourself?also I have all the DNS info correctly configured, and i assigned additional dns ip's from the isp themselves but still same problem. this configuration has been setup for over a year and has only changed recently when 2 things were setup:
1. msblaster patch was installed
2. a ras server new cisco router was installed when i upgraded a fractional T1 to a full T1 data line. The new cisco router has identicall ports and ip configuration as old one?
Any more help would be appreciated.
Seems to be only on Toshiba laptops???

This discussion is closed to new replies.