Discussion Locked

Dialing Modem

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My modem instantly dials a connection as soon as the O/S boots up, therefore, I can't work on any applications without being connected to the net.
I've checked all the settings and nothing is set to automatically connect but can't seem to find the program that might be initiating the connection or an orphan file that may be lingering from a previous program that initiates the connection. Help

7 replies

by md_hashim

You haven't mentioned what OS you use.
Assuming its Windows:
1) Have you checked all programs under startup?
2) Your autoexec.bat or config.sys may have batch programs to startup the modem - look and remark/delete the lines - ONLY - if you know how to do it.
Hashim

by thechas

I know that Me by default assumes that if you boot your PC, you want to go on-line.
I don't remember how I disabled this though.
(My Me box is stored away at the moment)
I think it was on a screen that popped up for dialing the connection.

Double check that both IE and OE are not set to connect whenever a connection is not present.

Look at the properties for your dial-up-connection.
On the options tab, check the box to bring up the terminal box before dialing.
This will give you the option to cancel the dial-up, and may have the box to disable the automatic connection.

by purplebook

The auto dialing is located in Internet Explorer. Go to the Tools, Internet Options, Connection. This is where you configure your modem to either dial when you boot up Windows, or not.

Look in the correct place (you can also look in My Computer, Dial-Up Networking for the ISP that you use).

This discussion is closed to new replies.