Question Locked

Did a trojan trash my hardware?

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently got a nasty trojan on my computer that did serious damage to my device drivers, mainly the network and communications devices. I reinstalled all of the drivers from the disk, but they still gave error 31: driver could not be loaded. I reformatted my hard drive and reinstalled windows vista, but now the same thing is happening. I still get error 31 after installing the drivers from the disk. With all fresh software, does this mean my hardware is destroyed? I can't connect to the internet with that computer because all of my network devices aren't working.

3 replies

by rob miners

To use DiskPart: Boot from the Windows 7 or Vista DVD and on the first screen click Next, click Repair your computer, click Next and select Command Prompt.

Type in diskpart and Press Enter.
Type select disk 0 and Press Enter.
Now type clean all and Press Enter.

clean [all]

Use the clean command to remove partition or volume formatting from the current in-focus disk by zeroing sectors. By default, only the MBR or GPT partitioning information and any hidden sector information on MBR disks is overwritten. If you specify the all parameter, each and every sector can be zeroed, and all data that is contained on the drive can be deleted.

This discussion is closed to new replies.