Discussion Locked

Dis-assembly of HP 5L

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am working on an HP 5L with a supposedly common problem - paper jam. The fix is detailed on several web sites. The problem is getting to the problem area.

Is anyone familiar with how to take the plastic outer case off of this printer? I haveremoved all the usual screws, and I just can't see what is keeping it on.

Could anyone detail how to get the shell off without breaking it ?

7 replies

by xpertdragon

I believe the HP 5L and 5P look alike, and I have a HP Laserjet 5P in one department here. One output tray, and an infared port on the left front side correct? From what I can see, if you are going to get that outter plastic shell off of the printer, it is going to be done from underneath. I assume you removed those screws already that are on the bottom?

PAul M. Chavez

by ann777

There's an extension to the paper tray... that slides back down and then you cannot remove the back. Slide it up, then gently pry off the back.

by ann777

The first poster is incorrect. The 5P has a paper drawer that the paper lays in flat without the posibility of bending.

The 5L (like the 4L, 6L, 3100, 3200, etc.) all have paper feeds on top of the unit. The paper stands on it's end. The most common problem is with the paper pickup roller and the paper separation pads.

If it is jamming at the pinput, you need to remove all of the outer covering. You need to remove the back to get at the printer feed assembly.

If it is jamming at the front, you need to remove the fuser which is generally called the "heating assembly" on these printers.

The plastic parts on these printers vary from model to model... but there are screws, hinges, and in some printers latches that need to be removed from the printer. The 5L has that paper feed that stands up and falls beck in. When it is in, you cannot remove the back because the plastic part in back has a bar across that prevents lifting unless that paper feed entension is lifted. I have one of these two cubes away from me right at the moment. Add a comment if you need more details.

This discussion is closed to new replies.