Discussion Locked

disable on board video card

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently upgraded my pc buy adding a video card (32mb) but my win/xp shows a conflick. When I called them for support they said I would have to disable my onboard video but would not tell me how? I emailed the motherboard manufacturer but no reply! My pc is an athlon (amd) 500mgh. What do I look for in the bio's?

7 replies

by thechas

In the BIOS, you need to look for 2 things.
First, in the peripherial section look for a setting to disable the video.
Next, look in the advance sections for primary, or first display device, make sure this key is set to PCI. (assuming your new card is a PCI card)

Then, you may also need to set a jumper on the motherboard to disable the on-board video.

Since you have identified the MB mfg. You should be able to find info on jumper settings, and perhaps a manual on their web site.

The better manuals step you through the BIOS settings and what they mean.

by dmiles

Boot the computer
At Startup,press the key to enter the bios
In the CMOS Panel navigate down to PCI Configuration locate the onboard video
Highight and hit enter,you can click on the video and select the Disable from list
Exit and save configuration settings

by donmars

Usually its a setting in bios setup. Look under Advanced Setup or Integrated, Onboard or some such label. Each MFG seems to want to use his own lingo but its there somewhere as a PCI device. Its a disable/enable function. Also go to the Motherboard web site and find documentation.

This discussion is closed to new replies.