4 replies
by Brien Posey
by gareth_white
by thechas
Do the CD drives show up on the POST screen while the PC is booting?
If not, enter BIOS setup, and verify that the IDE channels are set correctly for the drives.
Un-installing the software might have corrupted your IDE driver.
There are 2 ways to repair the IDE driver.
Simple method:
Open device manager.
Select and remove ALL 3 IDE controllers
Primary
Secondary
Root hub
Close device manager, and re-boot
With any luck, your CD drives should be back.
Second:
Download and install the latest chip-set drivers for your motherboard.
If this is a name brand system, you should be able to download the drivers from the mfg.
If not, start with the motherboard manufactures support page.
If you need help identifying who made your motherboard, or the chip-set installed, check out the following:
ID tools
www.motherboards.org
www.wimsbios.com
System information
www.belarc.com
(download the free tool Belarc Adviser)
Chas
by gareth_white
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending