Discussion Locked

disc drive

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My disc drive isn't responding, when a disc is inserted and attempting to look at information on disc in a drive, error message pops up, are you sure there'a a disc in the drive, cancel or retry again.

9 replies

by dmiles

Open Control Panel,double-click on the System icon,select Device manager and check to see if there are any yellow highlights on your disk or controller lines,try reinstalling the drivers.
The drive may not have completed a previous function or the drive needs to be cleaned.

by techv

Hi,
Before using the following solution,i assume that you able to access the disc drive in MS-DOS mode.
If you tried re-installing the drivers and had not worked,try starting the PC in safe mode and then access the device manager(found in Start > Settings > Control Panel > System > select the "Device manger " tab)
In device manager,select the propertis foe Floppy Disk Controllers,at base of that window, u get option of "disable in this hardware profile" select tht option by clicking in th small box and then click OK, again OK and it may ask for restart,restart the system ,try accessing the disk drive

by topesblues

If the two above answers dont work, try cleaning the drive with a cd cleaning disk.
(also some older drives cant read disks that were burned from a burner.. just a thought)

by s.o.f.t

hi
you could have a falty disc drive.
try swapping it with another one and see if that works

This discussion is closed to new replies.