13 replies
by danpiers
When you say it "won't boot at all now," do you mean that it won't boot from the installed WD harddisk...or...it won't boot from a floppy?
If it won't boot from the harddisk, but can boot from a floppy, you can do a few tests to determine the extent of the damage. After booting with a floppy, do a directory (dir c:) of the C: drive. If you see files, then the harddisk's partition is still present (and your data is probably ok.) If you get an error message, then you need to try using the FDISK command. (Of course, FDISK.EXE will need to be contained on your floppy disk to run it.) If FDISK finds the harddisk and allows you to view the partition, you may be able to re-format the partition. In this case, all data on the drive will be (and probably already has been) lost. You may be able to re-build your system's software to get it operating again. If the FDISK reported "eror reading harddisk) or a similar error message, your harddisk is probably toast. Since the drive is a Western Digital, you will need to download their software (WDDIAG) from their website. Use this software to test the drive. If the drive has any life left in it, running this software on your system will provide a code that can be used to get a replacement drive. (Generally, these drives have a three-year warrantee.) You wil have to pay shipping, but that is only about $10 or less.
If, you were unable to boot from a floppy or the harddisk, then there is another problem greater than a simple harddisk failure. Good luck.
by randyjkey
Assuming you have a Boot floppy disk, try fdisk /mbr before anything else this may restore the mbr - master boot record to the disk without further loss of any data which may already be corrupted.
If this works I would suggest you run a virus checker [as this is the main reason for non-bootable hard disks] and then Scandisk to possibly correct any errors caused.
If this doesn't work (or locks up on booting)please supply further details - i.e. Operating System - Windows 98 or 2k or ME etc.
by randyjkey
Assuming you have a Boot floppy disk, try fdisk /mbr before anything else this may restore the mbr - master boot record to the disk without further loss of any data which may already be corrupted.
If this works I would suggest you run a virus checker [as this is the main reason for non-bootable hard disks] and then Scandisk to possibly correct any errors caused.
If this doesn't work (or locks up on booting)please supply further details - i.e. Operating System - Windows 98 or 2k or ME etc.
by randyjkey
Assuming you have a Boot floppy disk, try fdisk /mbr before anything else this may restore the mbr - master boot record to the disk without further loss of any data which may already be corrupted.
If this works I would suggest you run a virus checker [as this is the main reason for non-bootable hard disks] and then Scandisk to possibly correct any errors caused.
If this doesn't work (or locks up on booting)please supply further details - i.e. Operating System - Windows 98 or 2k or ME etc.
by randyjkey
Assuming you have a Boot floppy disk, try fdisk /mbr before anything else this may restore the mbr - master boot record to the disk without further loss of any data which may already be corrupted.
If this works I would suggest you run a virus checker [as this is the main reason for non-bootable hard disks] and then Scandisk to possibly correct any errors caused.
If this doesn't work (or locks up on booting)please supply further details - i.e. Operating System - Windows 98 or 2k or ME etc.
by randyjkey
Assuming you have a Boot floppy disk, try fdisk /mbr before anything else this may restore the mbr - master boot record to the disk without further loss of any data which may already be corrupted.
If this works I would suggest you run a virus checker [as this is the main reason for non-bootable hard disks] and then Scandisk to possibly correct any errors caused.
If this doesn't work (or locks up on booting)please supply further details - i.e. Operating System - Windows 98 or 2k or ME etc.
by randyjkey
by randyjkey
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending