Discussion Locked

Display problem

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am currently using an IBM Pentium-II P.C with G42 Monitor of Model of 6540-02N.

After Format the Hard Disk when I reinstall Windows98 I am unable to configure my Monitor. At the moment my monitor is currently working on just 16 color.

Further more i download the vga driver file (moninf.exe) from www.ibm.com and unable to solve the problem.

Please guide in this regard.

9 replies

by hrhold1

have you checked your VGA cable to be sure it is not malfunctioning.
Secondly, is this an on-board controller or a seperate card? Be sure you have the latest video drivers in either instance.
Thirdly, can you install the monitor as a Standard monitor (IE: SuperVGA 1024x768) through -
Display Properties/Settings/Advanced/Monitor and does it still only have 16 colors?

Hope this will help ....... H

by nuznad

I have checked VGA Cable which is Ok
Yes it is build in Card
I did it but there is 256 color and after selecting it there is no change in view

by richard_barsby

Hi have the video drivers been installed. If you right click the desktop go to properties then settings it should tell you the monitor type and graphics card type installed, bottom left of the picture of a display.

Hope this helps

Rich

by cdb

The monitor has nothing to do with colours! you need to get the exact model of the computer. For IBM it is a 4 number machine type followed by a 3 number/letter code. Then go to IBM support an download the vga drivers. Install them and that is it.
Chris

by donmars

Your problem is the video graphics adapter driver, forget about the monitor for now. You have to discover the brand and model of your video adapter and locate the correct driver for it. You may have this driver on the setup disk that came with the computer if not you can locate it off the internet. Usually you can read the name off the video card on one of the chips on the card itself. If you have on-board video ( no in slot card) then you can locate this chip on the motherboard itself it is usually locate close to the video output plug area on the motherboard. S3 Trident, ATI, Matrox etc. Then go to that manufacturer's website and download the driver. You might also find it on your Win 98 installation CD in the Drivers folder.The installation precedure goes something like this. Right mouse click on the desktop (a clear area) click properties > settings tab> change> have disk> browse (to location of driver you downloaded, such as a:/ *.inf) and OK. sometimes the driver may be in an executable format and all you have to do is double click it to install it without going through all of the above. The answer to your problem is the video graphics adapter driver.

This discussion is closed to new replies.