Discussion Locked

do built in network cards interfer modem

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently built a computer with a built in network card. When I tried to install the modem it put it at com 5. But when test to see if the modem is working it's says it's not installed or plugged in. Do I have to disable the network card in order for this modem to work.

5 replies

by gijoe

The modem should be at IRQ 3 or IRQ 4. And it should be at COM 1, 2, 3, or 4. If it actaully resides on Com5, then it's not going to work. If it resides at irq 5, then you need to configure this properly.

Go to device manager and report IRQsand which COM port and wich memory range you moden is using. Report too, the devices on IRQ 3 and 4.

It'd be best to reset the modem to IRQ 3 and COM 2 or 4 .... or IRQ 4 and COM 1 or 3.

by estebandelatorre

Yes if the includes a modem too. Some card have both connectos and some of them allows the same connector to be used by rj11 or rj45 connector.
Simply disable the modem and do not install the drivers.

No, card and modem works together

This discussion is closed to new replies.