Discussion Locked

Do I need ECC Ram???

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Dell Poweredge 2300 Server with 256 MB
Ram (2x128mb DIMM).
I am pretty sure that it is ECC Ram.
Can I mix non-ECC with this?
Should I buy more ECC ram?
Can I get ridd of the ECC ram and buy all new non-ECC ram??

7 replies

by dmiles

If possible do not mix non-parity with parity,unless you disable parity checking in BIOS

In a Server setup that already has ECC memory,stick with the same memory when upgrading the memory modules

Yes you can take out the ECC ram and switch over to non-parity memory,parity memory provides an extra bit for error checking and may be preferable.

by maxwell edison

ECC (Error correction code) RAM not only checks for errors but can even correct some of them along the way. ECC RAM is more expensive than other types of RAM, and it's typically used in machines, such as file servers, that are used for mission-critical applications. However, with RAM as cheap as it is, the slight difference in price is certainly worth it.

Look at www.crucial.com

They have a wide selection of good quality memory at great prices. (No, I don't work there. I've just bought from them with excellent results.)

And by the way, ECC and non-ECC RAM cannot be mixed. (Unless you're looking for problems.)

Maxwell

by bohicam1

I had a similar problem with my dell server. I called dell and asked them about switching the type of ram and the answer was no, you cannot. It is hardcoded into the bios that the ram be ECC. After complaining to them about this tactic, they offeredme the extra ECC ram at cost...shhhhhh ;-)
Good luck!

Mike

This discussion is closed to new replies.