2 replies
by 46bdgsae Accepted solution
by oh smeg Accepted solution
If however you are using some form of Windows and have not been using the Safely Remove Option then the most likely option is that the Partition Information on the Drive has been corrupted and the drive is no longer able to carry the Partition Tables so it appears Blank tot he OS.
If you have left it plugged in all of the time the most likely thing is that it has overheated and damaged the HDD itself and the Associated Circuity in the enclosure and this is no longer working.
If you are not using some kind of External Power Supply then the most likely option is that the Required Current is not available for the HDD to work correctly and the Partition Tables have been corrupted or worse still the Electronics have been damaged. You should use both of the USB Plugs on the Y Cable in different USB Ports as one is a Power Only Plug and the other is a Power & Data Plug. You need both of these plugged into different USB Ports on the commuter or into a Powered USB Hub so that sufficient Current at 5 V DC is available to run the HDD. If there is not sufficient current available the HDD will suffer permanent damage sooner rather than latter.
The solution for Corrupted Partition Tables is to Open the Drive Management and format the Drive again so that the Partition Tables are rewritten and from now on use the Safely Remove Option every time you need to disconnect the HDD and or close the computer.
If there is damage to either the HDD or the Electronics in the enclosure you need to replace the damaged items and work from there.
If you have data on the drive that you need to recover your best bet is to send the drive to one of the Professional Data Recovery Houses and let them recover your Data though this is going to cost you quite a bit of money but it is the best way to proceed here.
If however it would only be [b]NICE[/b] to recover the Data you can use on the the Data Recovery Applications available to try to recover any Data on the drive but the more that you do the less likely you are to recover any useful data at all and if you do not know what you are doing the chances of destroying the data are very great.
Here is a short list of the better ones but it is by no means a complete list of all the available software.
While the last 2 are from the same company they are very different products. Win Hex should only be considered for use by someone who knows Hex Inside Out while Davory is a great cheap General Purpose Application.
Personally I prefer the On Track Option but it's anything but cheap. However because I use this type of software a lot it's paid for itself many times over by now, for a cheaper option Spin Rite from Gibson Research or Stella have both very good reputations by other TR members.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending