Discussion Locked

Drive not seen by BIOS

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Is there any method or utility to check a hard disk which is not seen by the BIOS. It may be faulty, seized or completely dead but none of the utilities I've found is able to see it so as to report on its condition.

1 reply

by thechas

If the controller electronics on the drive are bad, the BIOS, and test utilities, will not see the drive.
The simplest way to check if the drive may be alive is to monitor the drive at boot.
Have only the suspect drive connected to the PC. (You can even hold the drive in your hand to aid in sensing if it responds)
Does the drive spin up, and the head seek the disk during the post?
If not, the drive is indeed dead.
This is the drives built in self test. I have never seen a working drive that doesn't perform this quick test at power up.

Are the jumpers set correctly?
Many drives do not post to the BIOS if they are jumpered to master, and connected as a single.

I have also seen drives that do not "cohabitate" well together.
Again, try the drive connected just by itself.

Beyond the above, have you tried the utilities from Jargons driver mesuem www.drivermeseum.com
or pcwiz www.pcwiz.com

This discussion is closed to new replies.