11 replies
by munawwar_a Accepted solution
by wancona Accepted solution
Understanding of why:
All you need to do is ensure that the secondary has no default gateway and has an IP on a different subnet (for example, primary NIC = 192.168.0.33 , secondary = 10.10.10.5). Any hosts that you connect to the secondary NIC will also be given an IP in the same subnet and also NOT given a default gateway. Your problem with loss of connectivity is that Windows is trying to load balance the traffic across the two links. The metric checkmark must by nothing other than luck, prefer the correct network card.
And what someone else tried:
Well I just figured it out. It has to do with the "interface metric," I think. I went to each network adapter's properties, went to TCP/IP properties, clicked Advanced, and on the bottom Automatic Metric is usually checked. I unchecked that, and set the regular LAN connection to 1 (the Gigabit card) and the crossover connect to 99. Immediately things started working.
by munawwar_a Accepted solution
I need the office gateway in order to do my work and I need the ADSL gateway so I can download stuff while I'm working on office LAN.
And yes i tried changing metric and it seems the card with the lowest interface metric always work and not the other one.
Any other ideas pls??
by gcmartin3 Accepted solution
In most cases, WinXP would have no problem accomplishing what you ask for you.
But in this case, I would look for one of the following. Either:
Your system Administrator at work has a policy set to not allow your machine to route when both adapters are active or
Your machine is set to not route (bridge) when both adapters are active.
I have usually seen the latter when there is a wireless adapter used as a 2nd adapter.
Are you using a
Network Interface Card (NIC) or a wireless adapter or an ADSL card that goes straight to your telephone wall connection? Which one of the 3 are you using?
by munawwar_a Accepted solution
..so I can change anything if needed. No man, I'm using just two NIC's, one which connects to the office LAN with the gateway of 192.168.4.10 and the other NIC goes into my ADSL router 192.168.0.1
Is it possible to use both gateways at the same time to do everything?
by gcmartin3 Accepted solution
I'll help you design if you PROMISE to help someone else here in this forum in the future. I've see so many people use this without ever once thinking about trying to help someone else. This is a forum devoted to helping. Not a free service. Even if you try to help someone else, it helps all of us!
Now, I'm a little confused, yet want to help you. So, lets do this:
To use 2 LAN adapters in a Windows environment is really simple if your 2 networks are designed to make your life easy. ITs NOT YOUR PC that's the problem....But, it is too, if your network is NOT telling him useful information.
Let start with your internet connection; your ADSL modem should be providing IP services to the PC(s) that you connect via its RJ45 jack. Let's take advantage of that by setting the adapter on your pC that goes to it to "Obtain... IP and DNS!!!" that service. When this occurs and your PC reboots (if it asks), you will have an IP address assigned for it that looks like 192.168.0.???. Do an "IPCONFIG /all" and let me know all the numbers that shows on the screen for that and the other adapter.
This procedure will always allow internet service and you should be able to go to Techrepublic.com" site and anywhere else on the internet.
by munawwar_a Accepted solution
by cg it Accepted solution
by gcmartin3 Accepted solution
by munawwar_a Accepted solution
by jb8802 Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending