Discussion Locked

"Dual Slot1 to Dual FC-PGA issues"

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Dear Sirs:

The issue I'm adressing here, goes as follows:

I own this wonderful piece of hardware, namely, the "ASUS P2B-DS" mainboard.I want to be able to upgrade this mainboard with more powerfull processors, overcoming the current limitationof the Slot1. Therefore, and after being informed that there was no problem, I bought two "ASUS S-370DL FC-PGA Slockets" for future upgrades. After having appealled for ASUS support (to no avail up until now!), I decided to adress some Internet sites, including the european VNUNET test labs, without any conclusive replies. The main issue is not the BX chipset but rather the inability of some FCPGA CPUs to run in dual processor mode.? After consulting Intel's site, I became aware of Intel's newVRM 8.4, so I wondered how could I be sure that the "ASUS S-370DL" slocket, complied with this new voltage regulator version. Anyway, my question is: does SMP depend upon the BX chipset, the FC-PGA processors or any other issues?

5 replies

by sobèr

According to Intel and one of their main distributor here in Norway, all of their Pentium II and newer prosessors should be abel to handle an dual prosessor enviroment. The only FC-PGA prosessors that do not support a dual prosessor enviroment is the Celeron type. Intel have here added something (i guess) to the prosessor that stops it from starting up.

Have tried several prosessors on the same motherboard as you have, and not had a problem with any pentium II / III prosessor.

The Celerontype in other hands give on this mainboard an error message (via sound) and wont boot up.

AreH

by Member 31445484

If you want to use coppermine processors in that mainboard, you should buy them slot 1. I experienced that problem with another brand of mainboard and there was no way to make the system work with thoose adaptor. Also you could have a jumper settingon the slockets for the dual processor mode, but I don't think it will work too.

This discussion is closed to new replies.