Discussion Locked

DVD as extra drive?

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a new DVD player that was purchaesed for a TV but is not in use. Can I use it on my computer as an extra drive? If so, how do I do this?
Thank you
K

9 replies

by dmiles

This will depend on your system setup
If you have only one drive and a cd-rom connected to Primay Controller
Install the DVD on the Secondary Controller as a Master
Boot the computer and it should be detected,insert the cd-rom to load the software drivers
Read the manual or instructions that came with your DVD for futher installation instructions

by k.dietrich

Thanks Soulrider: Yes I only have one cd drive installed. There is no software with the DVD player as it was ment for Tv. Also None of the connections will work. Is there an adapter to use the S video connection with the computer?
Thanks
K

by thechas

If this DVD player is a standard home player with video and audio outputs, the only thing you can easily do with it is connect it to a video input card and watch DVD movies on your PC.

Otherwise, what you would need to do, is open up the case, tap into the data stream from the laser and connect hardware to convert the data stream to IDE or SCSI data. Not a simple task.

by timthetoolman

Hi,

Almost certainly TheChas is right.

Check the back of the DVD drive. If there is an output labled "digital out" then there may be some hope of doing something useful with it.

If this is the case, then you might be able to do CD ripping with it... but I'd be surprised if you could do much more.

Unless there is a PC style connector - maybe USB, SCSI or IDE, then the chances of it being "another disk" are very slim indeed.

Cheers,
Tim.

This discussion is closed to new replies.