5 replies
by csmith
I assume this machine is new, and you have done all of the normal things like check the cable connectors etc. in hardware, and have checked all of the software installation and settings in Windows, so I can only recommend that it be returned under the warranty.
Regards, Chris
This answer is to be posted the first of April.
by jr91847
by acosgrove
I'm not certain what your question is but we'll try a couple of different angles. First of all if the drive isn't showing up in My Computer, you should check to make sure the IDE cable and the power lead are plugged in. If these cables are pluggedin check to see if the computer sees the drive during the IDE scan in the boot sequence. If it doesn't see if the DVD Rom and the HDD are on the same IDE channel. If they are, set the HDD to Master and the DVD to slave. If they are on seperate channels or the above configuration is set then the drive is probably defective and you should conntact the warranty company.
Second, if the drive IS visable in My Computer but you can't play DVDs on it then you probably need to install a DVD Decoder. One should have come with the system but if not you can usually download them from the WEB.
Good Luck
by jr91847
by jr91847
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending