7 replies
by csmith
I don't know where the white papers are, but from practical experience I can tell you what happens.
When EMI is too high, you get a lot of false read and writes.
The symptoms are almost exactly the same as when you have a marginal connection in anIDE cable.
I assume you are installing PCs on a shop floor in heavy industry.
Another thing you have to watch out for in this situations, is the power fluctuations.
When heavy machinery starts, a huge sag can occur, even though they use various methods to reduce the starting current.
Pay attention to the grounding.
The electrical noise generated by some industries is unbelievable.
Regards, Chris
by rross
I appreciate the info. But I'm really trying to find papers and/or studies on this for a planning and decision making meeting. Basically support documentation. It doesn't matter what the answer is as long as it's correct.
But I definitely thankyou for confirming my thoughts on this.
by s_pryce
An excellent white paper for EMI & EMC concerning hard drives can be found at
www.seagate.com/docs/pdf/newsinfo/disc/electromagnetic.pdf
Its a bit in-depth and not bedtime reading, but its got the detail.
Hope thats the sort of thing your after.
by rross
by csmith
Although the Seagate article does not address skin current analysis etc, and is too old to have addressed the antenna shielding effect of using a UDMA100 cable, the main advantage, is that the models used are valid and equal for EMI reception as well as emission.
(Sort of a form of Kirkov's law.)
The article is also very in line with my experience, so I can say it is valid in the field. Looks good, use it.
Regards, Chris
by rross
by rross
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending