Discussion Locked

EP-5BVPXB

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
IM TRYING TO INSTALL AN AMD K6/2-350 IN THIS BOARD.ALL I CAN GET FROM THE JUMPERS IS 333,366 AND 400.THE MANUAL I HAVE ONLY GOES TO 333.I REALLY DONT WANT TO OVERCLOCK.

3 replies

by thechas

Check with epox www.epox.com for a bios update.
Their site was not responding when I went looking.

At motherboards.org, the information says that you have bus speeds of 60, 66, and 75 MHz.

I wouldn't be concerned about overclocking by less than 5%. Just be sure you have a good heatsink and fan. And that the core voltage is set correctly.

This discussion is closed to new replies.