Discussion Locked

Epson 660 Printer Head Cleaning

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Can anyone out there advise me on how I can go about cleaning the print head of the Epson 660 color printer?

I put several new cartridge in when it ran out but it still isn't printing, even though I have done several head cleaning according to the manual.

2 replies

by ann777

Your best option is to take it in to a printer shop for cleaning. Sometimes ink gets dried in the nozzels and they can run ink cleaner through them when the head is remove from the printer.

Before doing that, you might shine a flashlight into where the ink cartridge goes and make sure that there's no dried ink on the outside either. You should be able to clean any dried external ink with 71% rubbing alcohol and a cotton swab.

But if you cannot find the blockage, then take it in to an authorized Epson or printer repair shop.

by wlbowers

An Epson service center will take the unit apart and soak the head in cleaning solvent recommended by Epson.

Average cost out of warranty is $100.00.

Lee

This discussion is closed to new replies.