Discussion Locked

Epson DFX5000+ Out of Paper

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have the above printer (second one) that if you let the paper run out, and reload, it shuts down and will not restart for some period of time, usually 1-2 hours. Once restarted, it is a nightmare trying to get the paper reloaded. Everytime you load it, it loads, lines up the paper and shuts down. You need to start the whole process over again, including the wait. Any ideas appreciated.

1 reply

by andymac

The printer powers down as a self protection feature. Unplugging it from the wall will result in a faster recycle time [capacitors discharge in power supply]. The printer will shut down for a number of reasons - obstruction in dot head path paper, label goo etc., platen gap not set correctly or bad platen gap motor, paper width sensor blocked [blow dust from around dot head - optical sensor], dirty or gummed up carriage rails/bars - clean and lube lightly with product like triflow, bad power supply or main board.

This discussion is closed to new replies.