Discussion Locked
0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i resently installed a ATI Radeon 64mb Pro on a P111 866, every time the system boots i get the error message 162 system options not set. i get the option of F1 to boot, the system boots up with no problems after that and all is fine within, but this message reappears whenever the system is rebooted. The battery and everything has been changed. any suggestions.
7 replies
by saihib
These are ATI's recommended settings for a Radeon 9000 Pro.
CMOS Option Recommended Setting
AGP Bus Turbo Mode AGP Turbo DISABLED
Primary Frame Buffer VGA Frame Buffer DISABLED
AGP 1X/2X/4X Should be set to match the capabilities ofthe graphics adapter
AGP Aperture DEFAULT or 64MB
The question was auto-closed by TechRepublic
by guruofdos
162 system options not set is a BIOS message. Does the board have on-board graphics, and have you disabled them or not??!!
The question was auto-closed by TechRepublic
by paulp
My first guess is that someone cleared the CMOS settings using the jumper on the motherboard and didn't return the jumper to the NORMAL position.
The question was auto-closed by TechRepublic
This question was auto closed due to inactivity
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies