Discussion Locked

Error messages upon installing CDRW

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

when CDRW was installed on my pc several errors appeared such as the ff:

EXPLORER caused an invalid page fault in
module PDM.DLL at 0177:4a01259d.
Registers:
EAX=00000000 CS=0177 EIP=4a01259d EFLGS=00010246
EBX=017d1f74 SS=017f ESP=0146fe44 EBP=00000000
ECX=017d1be0 DS=017f ESI=017d1b40 FS=0e17
EDX=00000004 ES=017f EDI=017d1f64 GS=0000
Bytes at CS:EIP:
8b 10 ff 52 08 83 c6 04 eb c9 53 ff 15 f4 00 02
Stack dump:
00000000 017d1af0 017d1f58 00000001 4a01275a 017d1f54 017d1af0 00000000 4a012fed 017d1f58 4a012b06 017d1b10 00000000 00000000 00000000 017d0c30 vv

another is:

EXPLORER caused an invalid page fault in
module KERNEL32.DLL at 0177:bff9d709.
Registers:
EAX=c0030324 CS=0177 EIP=bff9d709 EFLGS=00010212
EBX=0065fde0SS=017f ESP=0061fe98 EBP=00620134
ECX=00000000 DS=017f ESI=00000000 FS=2407
EDX=bff76859 ES=017f EDI=bff79198 GS=0000
Bytes at CS:EIP:
53 8b 15 dc 9c fc bf 56 89 4d e4 57 89 4d dc 89
Stack dump:v

Kindly advice me on how to troubleshoot.

7 replies

by dmiles

Open the control panel and double-click the System icon,select the device amnager icon and go down the list to check for the device,if their are any yellow exclamations markrs click and then it will give details on the conflict.
Kernel32.dll is a error that you may have to reload the operating system to clear.
these problems occur when service packs are not installed,also the device drivers have to be updated,go to the manufacturer site of your product and look up info on your particular device to search for noted problems.check the microsoft knowledgebase for solution to kernel32.dll problems
www.microsoft.com/kb/support

by bv2

Remove the CD-RW and reboot to see if the problem goes away - if it does, download the latest drivers for your CD-RW. If it doesn't consider doing a reinstallation of the OS

by txtopgun

Were you replacing a previous CD/RW drive? If so, look for conflicts between drivers or software from old to new. You are looking for a software problem, not hardware.

Dave

This discussion is closed to new replies.