Discussion Locked

Error: No fixed disk present

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a latop that recognizes original hard drive,but when I try to put in replacement drive I get an error that says No fixed disk present...
I believe this to be a hard drive issue
Question for all...Does anyone know where I can obtain parts for repairing laptop hard drives?

17 replies

by saihib

Is the drive recognized in BIOS? Has it been partitioned and formatted? Are the jumpers, if it has any, set correctly?

by michael.spellman

Not recognized in the bios...No jumpers...unsure if partitioned and formatted because it is not seen by the bios ...Cannot get it to recognize the drive in either auto or manual in bios ....Not the system as other drives work in it...Also had identical drive in system working fine...System is a Micron zx pIII 750...Drive is a 20 gig IBM travelstar

by dragonnite

You haven't specified what type of laptop you have, age of laptop(legacy), or capability. There are many warehouse sites that provide replacement drives. First check with the laptop's manufature site to identify capability issues, they may even provide serial number items for replacement. I could also be experiencing a BIOS/system board capability problem with the replacement drive. Especially with some Legacy systems.

by michael.spellman

Also had identical drive in system working fine...System is a Micron zx pIII 750...Drive is a 20 gig IBM travelstar

by saihib

From your description, sounds like drive dead. If under warranty, send back. If not, replace.

by hberkhoff

The problem could be hardware related, so maybe the new disk is failing. Replace it for a new one.

But what you don't mention : Are both disks the same (Type/Model, Size). If the new one has a bigger size it could also be a BIOS problem. If this is the case download/install the latest bios update for your laptop and try again.

by digital_dna

Take it out and bang it on the desk a few times.

Just kidding, I don't have a glue when it comes to laptop HD's.

Good luck
ebcdic

by rogstuva113

If you got the harddrive new it should have came with a bootable floppy. If so then boot from floppy first.

by duarte.rafa

Hi, why don't you try to follow this steps:

1- Look for one label on the new HD and look for the disk data (cyl, heads, space) and write it on a paper sheet, then install the disk in the lap.
2- Turn on the Lap
3- Get into the bios and try to match the HD data with one of the list, if it doesn't, specify it as user defined.
4- save the changes and restart the lap. I think, God willing, after this you can use fdisk from a bootable floppy to configure it.

This discussion is closed to new replies.