Question Locked

error when formatting

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
help, im pulling my hair out here, i recently got my hands on a seagate harddrive and tried to put it into my pc, when i started to formatt my new spangled fool of a drive it got to the end and then......... yes thats right i recived an error message now my hard drive isnt even detected on the bios screen, ive tried everything and still cant get it to work is there someone out there that can help, before my drive does a lemming inpersinantion and jumps off a cliff, cheers guys

7 replies

by michael jay

I would say your drive has already left the building.
To verify this for sure connect it to another computer, if the bios there does not see it then I would say your drive has died.

by w2ktechman

Listen to Michael.
Recently I was backing up data on a drive as well, it go 1/3 done and then the file system could not be read. rebooted and tha HDD could not be found. I used many tools, but in the end it was a lost case.

by rmohammed210

See if the maker's have any dos tools or type of utility for problems like yours. Hard rives are cheap enough anyway buy another if you're not too much out of pocket.

by shaynechadwick

yup, yup, yup, thanks for the diagnostic tool it didnt work but im sure this will come in handy at a later stage even that didnt detect the drive, dont know why the drive is definantly spinning, im really stumpped ive now tried everything i think and i think your right i should just buy another (i could have bought 3 if i was paid 0.1p per hour the length of time i spent on it), so now i have sent 3 emails to seagate tech support still with no reply (4 days now) will keep you posted if they say anything good and thanks for the help guys

by sunny_leo_20

hi bro
this is sunny

if your HDD is not shown by your computer
in bios u can change the data cable
it might be issue with ur data cable.
u can check the jumper setting also.and one more thing make sure it HDD should connected to ur cmputer as primary master
plz try those things it would work 4 u
"GOOD LUCK"

This discussion is closed to new replies.