Does it have it's own Power Adapter or does it get it's power from the USB Port?
If it gets power from the USB Port try it in another USB Port on the computer where it doesn't work. Ideally one in a different connector to the one which it isn't working in.
If you do not have another USB Port that you can use get yourself a Powered USB Hub like the one shown here
http://www.mittoni.com.au/usb-20-powered-7port-hub-p-1920.html
And then see if it works now. I'm guessing that it will work and that your issue is related to the available Power not being sufficient to power this device.
What can happen is that when a USB Port is overloaded it can burn out the 5 V Supply to the Socket and stop working.
If the Drive inside the enclosure is bigger than 80 GIG and doesn't have it's own Power Supply you should be using 2 USB Plugs on a Supplied Y Cable at the computer to get enough power to run the Drive.
USB Ports Standard specifies 500 Milli Amps at the Socket but this doesn't need to be followed by the Computer/M'Board Makers and they could be supplying less or just have crappy Power Regulators on the M'Board which have gone off and are no longer providing sufficient Power/Current to run the HDD.
If this HDD Enclosure has it's own Power Supply make sure that it is actually plugged into a working Mains Socket.
Col