7 replies
Hi it could be that one of the normal Com ports or the modem has been reasigned to Com5 therefore when deleting Com 5 it just puts it back. Try to delete the others in turn until you find the one that does not come back after reboot.
Rich
by alanatyem
by thechas
If comm port 5 was the port assigned to the extra card, what you have is part of the driver still there. Some drivers create a virtual comm port for the hardware to use.
Start in add/remove programs, and see if the comm port driver is listed there. If so, remove it.
Another place to look is in the system files.
Run sysedit and look through the files for lines related to an extra comm port, or the card that you had.
Rem out the lines, and re-boot.
If the system boots fine, and theextra comm port is now missing, you have found the cause of the problem.
You should be able to delete the lines, and the related software files.
As always, back up files before editing so you can recover easily.
by alanatyem
by purplebook
by alanatyem
by alanatyem
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending