Discussion Locked

Finding UltraSPARC II CPU models

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We've been having problems with some of our CPU's. I need to find out if the UltraSPARC II CPUs in our
E6500's and a few other servers are model 5235, 5661, or 5762 so I know which ones need to be replaced.
Since I don't want to power down all our servers to check the motherboards, I would like to know if
there is a solaris command that will give me the information. Right now all I can find is the processing
speed, e-cache, etc. Or perhaps there is another method that is less obtrusive than powering down servers that will let me know what model the CPUs are.

10 replies

by sixfourtykilo

I attempted to do a little research on your behalf at both SUN and SPARC but their sites are too vague to determine. SUN says you can have up to 30 processors in a server... impressive but not helpful. Worse comes to worse, you could check the invoices. I'm sure that someone has those for the justification of those thousands upon thousands of dollars spent on something that plugs into the wall and says hello (j/k).

Good Luck!
640k

by stephan

I'm not near any Solaris machines at the moment, but try "psrinfo." The '-v' argument may be the one, but look up the man page for it to see for sure.

Also try running "/usr/platform/sun4u/sbin/prtdiag -v" and see what that tells you.

hth, from my brother.

~Stephan~

This discussion is closed to new replies.