Discussion Locked

Floppy keeps spinning

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

After formatting my hard drive and reloading Win98SE, my floppy drive now spins a few times every couple of minutes for no apparent reason. It usually occurs when I double click an icon, such as any of the icons in the Control manager, but also occassionally spins every couple of minutes when the computer is idle. There may or may not be a disk in the drive, but since I have a very noisy floppy I usually keep one there to silence the noise. I'm becomming pretty irritated with it all.

It never did this before - how can I make it stop?
Thank you-

13 replies

by kdurichek

To make sure it isn't software I would strip out msconfig to only what you need to run (systray, explorer, etc.). Then reboot and see if it still happens. If it doesn't I would re-check 1 or 2 boxes at a time and reboot. Time cosuming, but it works.When it starts back you have your culprit. If not I hate saying it, but buy a floppy drive for $10 or $12 dollars and install it. There is no logical reason for 98 SE to do that.

by lo

Other possibility is that one of your applications last used A:\ and keeps trying to access.

If you put a FD in A:\, access with Win Explorer, shutdown, and remove the disk, you will get an error next boot that A:\ can't be accessed (if there is a disk in the drive you don't get the message).

Some other app is doing same/similar, but not giving the message, tries now and then to see if the A:\ came active by making an access, that causes the drive to spin, after a bit of inactivity, the drive stops, the application timer expires and it tries again.

Not sure how you might go about finding the the application exactly. I have same/similar on my CD and CD-RW, from Creative, RealPlayer and other applications that all think they shouldcontrol the CD's.

by csmith

In addition to answer #2, check that there is not an A:\ in the path statement. (You probably should not have a path statement.)
This problem can also be in the registry.
There is nothing wrong with the floppy drive.
It is just following an idiotic command from the OS.
I assume you have reloaded Win98SE again, without formatting the hard drive. (Just D:\SETUP.EXE (+switches) ).
Regards, Chris

by ataj44

This answer solved my problem. I did have a path statement in my autoexec.bat file that included a:\. Removing this line stopped the cpu from continuously accessing my floppy drive. My computer runs quiet now and my sanity has returned.

Thanks to csmith@smithandyoung.com!

by lorisino

To make it stop, right click on My Computer. Go to Properties, then Performance, then (lower left) File System. Click on File System and go to Floppy Drive. Uncheck the box that says: Search A drive each time computer starts. This completely eliminates the problem. It did for me at least. Good luck!

by dmiles

The floppy make be trying to locate recently acessed file or programs that were loaded, stopped before completion
Select Start,My Documents and check to see what programs or files are listed
To clear Select Start,Settings,then the Task bar and Start menu,click on Advanced tab and you can select to clear the My documents folder.

by skutts

Have you got any AntiVirus software running? If so, it may be set to scan all removable drives, or all hard drives and floppies.

Hope this helps

Rog

This discussion is closed to new replies.