Discussion Locked

floppy not accessible

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My a Drive isn't accesible. When I try to use it, it says to retry or cancel. Retry does nothing. I've tried a different floppy from another computer and now that computer doesn't work either. I've tried deleteing them from the system manager, windows finds the floppy again but it still doesn't work. It doesn't appear to work in DOS either. Please help

7 replies

by lamvidao

Open the PC, remove IDE cable, power cable, restart the PC without floppy. Then plug everything back, check for light on the floppy. If it is on, floppy shoud work otherwise check for conflict.

by handn1_

Sorry is the floppy not working or the device
when said try in a nother computer you said the other computer doesn't work either.
Can you run a virus scan to see it your computer is infected?
let me known
e-mail handn1_@hotmail.com

by opatzg9

ok first the obvious, you need to put a disk with data in the drive. That not working next is the light on the floppy on all the time? Then your ribbon cable is on backwards, reverse it. Does the light ever come on on the floppy? if not it has no power, try disconnecting and reconnecting the power lead. Still no go try reseating the cables on the motherboard perhaps they're pulling away. Next try a known working floppy drive from another pc. Still no go then it has to be the floppy controller which is bad. You can either buy a card with the controls on it or get a new motherboard. It could be a virus but I kind of doubt that. Another place to look would be in bios and see what your floppy drive is set up as 720k, 1.44,2.88 and make sure taht is correct.Hope this helps.

This discussion is closed to new replies.