4 replies
by santos_gonzalez Accepted solution
by thechas Accepted solution
Here is what I used to do for all of my Windows Systems.
Install the drive as a secondary drive on another system, or in an external drive enclosure.
Partition and format the drive into a primary and an extended partition. The extended partition needs to be at least 1GB in size.
Create a logical drive in the extended partition.
Format the primary partition and make the drive a bootable volume.
Format the secondary partition.
Copy the Windows XP CD into a folder on the logical drive. Use a DOS format name for the folder like WINXP.
Move the drive back to the laptop.
Boot up. At the DOS prompt, navigate to the folder on the D: drive.
Run Setup.
Follow the prompts to install XP onto the C: drive.
You can also do this with an external CD drive, or by copying the XP CD onto a bootable external drive.
Chas
by santos_gonzalez Accepted solution
Thank you for your advise. I did everything except for makimg the primary bootable. I can use more advise.
Thanks
by thechas Accepted solution
For XP, there are a couple of ways to make a disk bootable.
Does the Sony have a working floppy drive?
If so, download the correct Floppy Boot Disk set from Microsoft. There are 6 different versions. While for just formatting it should not make a difference, the system files can make a difference.
Run the executable and create the floppy disk boot set (5 or 6 Disks).
With the hard drive in the Sony, boot from the floppy disk set. I think the floppies will take you far enough to format the drive and copy the system files.
If not, you will need to format the drive and boot from the floppies to get started, then point to the folder with the copy of the CD to install XP.
Or, from an XP system with the drive in the enclosure, there should be an option to make the drive a bootable volume when you run the format process from Disk Manager.
Chas
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending