Discussion Locked

Formatting Compaq Hard Drives

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Here's the background. An employee had trouble with their Compaq computer, so they used the system restore CDs that came with it. Halfway through, they shut off their machine. When they tried to reboot - it couldn't. I tried a boot disk to no avail-it couldn't even recognize the format cmd. I decided to take the drive home and set it as the 2ndary master and format it via my OS. Here's the deal, it's a Compaq-they keep the BIOS/CMOS on the HD - How do I format it etc.? (where would I get the BIOS/CMOS - the web site doesn't seem to have'em? - Where would I put'em? Is there a special way to Fdisk it OR install the OS as it is placed in unpartioned drive space?)

14 replies

by wanabedrsean

if you tell me the model number I can help you more compaq calls this the diagnostics and setup partition. Basicly you can download the disks to set this up in the form of a softpaq then boot the machine with the setup disk and install the partitionwith the utility on these disks. Sounds like a compaq deskpro 2000 but what model. or an old presario. The diagnostics and setup partition is the only thing I can think of that is special about the drive. if there is something wrong with the drive most deskpro 2000 had a three year warranty on parts from the date of purchase yours may still be under warranty. if you need more help email me at sps77@home.com

by computechie

I have 2 Compaq Servers I use for personal use, and they do keep the BIOS on the HD. What you have to do is get the boot floppies, I beleive they're called Support Paq's. Mine consist of 4 floppy disks, there is a option in there to replace the BIOSon the disk, as well as setting up the hard drive to the particular OS that you are going to install on it, and then it will format it. This is pretty irritating way to do things, but it's the only way to do it on a Compaq. By the way, if you dont have the floppy's, www.compaq.com and go to their support area, they are really nice about updating software, and having it readily available. Download the Support Paq and create the floppy's and you should be in business. Hope this helps!

by donmars

OK FIRST OF ALL!!! NO COMPUTER STORES THE BIOS/CMOS ON THE HARD DISK. Unless you have a SCSI Hard drive which use its own bios in its electronics circuitry to load itself. I think you are using an IDE drive. CMOS BIOS is the Basic Input Output System stored on a Complimentary Metal Oxide Symetry silicon chip on your Mother board. All this bahooey hogwash about the BIOS on the hard drive (IDE) is plain misinformation! You probably can't boot from floppy because the recovery diskette applied a security option or changed stuff in the bios settings in the computer. You have to go into setup and configure the BIOS to boot from the floppy. AGAIN THE BIOS IS NOT ON THE HARD DRIVE! Try this from the "broken computer"
Start or restart the computer.

Press the F10 key when the F10=Setup message is displayed.

Select the appropriate language option.

Press the Enter key.

Select Storage > Boot Order.

Press the Enter key.

Select Diskette Drive (A:).

If Diskette Drive (A:) is Disabled, press the F5 key to change it to Enabled.

If Diskette Drive (A:) is listed after other devices, change it to First.

Press the F10 key to accept the changes.

Select Storage > Options.

Press the Enter key.

Select Diskette MBR Validation.

If Diskette MBR Validation is Enabled, change it to Disabled.

Press the F10 key to accept the change.

Select File > Save Changes and Exit.

Press the Enter key.

Press F10 to save the changes and exit the F10 Setup utility.
We should try to understand what the BIOS is and what it does. NO COMPUTER (except SCSI hard drives) STORES BIOS ON HARD DRIVE IN ORDER TO START UP. It does not make sense because the computer on bootup would not even find the hard drive let alone be able to load those drivers on it! Lets not pretend to be "experts if we aint!" I refer to one of your answers, I wont call names.

by donmars

P.S. One other thing if the recovery disk contained routines to flash your CMOS on the motherboard, it aint on the Hard Drive(do not think this is the case), and it was turned off in the middle of doing that then you are royally screwed!

by james a bailey

geez, i wish i wouldve known that Compaq didn't store their's on about a 50MB partition on the hard drive, I wouldnt have spent 3 days with compaq support, and downloading the disks to reinstall it after i accidently deleted it.

They have them available to download on the website. Your best bet is to call Compaq support. They can point you to the right direction, it was so long ago I forgot the exact address.

This discussion is closed to new replies.