Discussion Locked

FORMATTING NTFS BACK TO FAT

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I HAVE A 40G HDD THAT IS FORMATED NTFS THE PRIMARY DOS PARTITION IS ONLY 8Mb I CANNOT DO ANYTHING WITH THE DRIVE FOR SYSTEM NOT BEING ABLE TO RECOGNIZE THE NTFS PARTITION. WOULD APPRECIATE INPUT ON THIS MATTER. HOW DO I GET RID OF THE NTFS WITHOUT LOOSING HARD DRIVE SPACE.
THANK YOU
ROBERT E. FLYNN

10 replies

by timwalsh

I'm a little unclear as to what exactly your problem is (other than the fact that you don't want NTFS).

What "system" is not recognizing the NTFS partition? Are you talking the operating system, BIOS, FDisk?
How did the drive get formatted as NTFS?
What operating system are you attempting to use?
When you say you want to get rid of NTFS without loosing hard drive space, do you mean you don't want to lose any data on the NTFS partition?

If you can be a little bit more clear about what you have done and what you are trying to do, we can give you a better answer.

by thechas

If you are looking to start over and partition the drive again.
(you will loose al data on the drive)
Use fdisk, and delete the non DOS partition.

Then, delete the other partitions, and start over again.

I assume that you are using either windows 98, 2000, or XP.

If you are using NT, I don't beleive that the "boot" ntsf partition can be larger than 8GB.

If you don't want to start over, then get the latest version of Partition Magic.

Chas

by gmturner

You might be able to use Partition Magic to accomplish what you are looking for. You can find more about it at:

http://www.powerquest.com/partitionmagic/

I used an older version several years ago and liked being able to convert from one file system to another without loosing data and also being able to resize partitions. Remember though that DOS will not be able to read more than a 2GB partition... is it possible to use the command prompt under NT or 2000 to run the DOS based apps you aretrying to run? This might be a way to keep the functionality of the DOS apps while also keeping the advantages of NTFS.

- Marc

by william jay

Delete the Non-Dos partition sounds easy, but when you try it, it will surely fail. "Cannot delete Secondary partition while drive logical drives exist". This is because Win9x fdisk is unable to delete the logical drive letter that it cannot assign in the first place, due to NTFS file system.
The Linux fdisk program is another story altogether. Boot from a Linux CD, and use it to delete the NTFS partition and the secondary DOS partition. Boot again with Win9x and use it's fdisk to create a new partition. The small primary partition may contain diagnostics software, especially on an older Compaq, and is usually "hidden". If you want to make the whole drive available to Win9x, delete the primary partition also, then reboot and use Win9x fdisk to create a bootable partition of 100% size. . cheers.

by william jay

There are several limitations to drive size, both physical and logical, dependent on BIOS and Operating System(s). My recommendation for the drive is to create several partitions and logical drives. Win9x fdisk may be unable to see drive space over 30GB, and will only create one primary. Again, use Linux fdisk to create a primary DOS partition with a manageable size of about 4GB, make it bootable. Create another primary partition of about 8GB, then a secondary with the rest, which makes each partition less than 30GB. . cheers.

This discussion is closed to new replies.