Discussion Locked

Formula for HD size????

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Is there a "simple" formula for distinguishing the size of a hard drive by information normally given on the "tag" of a Hard Drive. I've heard of a quick and easy way to determine this but I just can't seem to remember the formula or where I remember reading about it.

2 replies

by tech_wiz03

drives are organized by tracks, cylinders and sectors. So assuming for sake of arguement there are 16 heads (cylinders) and 160 tracks x 18 sectors each and 1 sector holds 512 bytes the geometry becomes 16x160x18x512 == ~23gb unformated space. You will loose some actual space once it is formated. Another way is to pick-up pocket pc-ref by Thomas J glover or millie M Young and look your drive up in it. Another way is to check the drive out on the manufacturers web site.

regards
rick

by wcp

Yes, there is. It is in the Model name. But it is not that simple.

Western Digital:
A typical model might be WD400BB or AC33200. In the first example, the 400 means 40.0GB, the last digit being a fraction of GB. In the second, the 3200, ignoring the 3 after AC, means 3200 MB or 3.2GB, the last digit being a MB.

Maxtor:
A model might be 52049H. This is 2049MB or 20.49GB HD ignoring the first digit. I have a model 4R080J0 and this is 80GB not 80MB.

Seagate:
A model might be ST34313A. The 3431, ignoring the 3 after ST, means 4313MB or 4.3GB. There are exceptions. A model ST94011A is not 4.0GB but 40GB.

Fujitsu
A model MPE3084AE is an 8.4GB HD and MPE3173AE a 17.3GB.

So there is not a uniform formula. The formula is based on the model series. If you need more information, visit each of the manufacturer?s website.

This discussion is closed to new replies.