Question Locked

Foxconn motherboard 661FX problems with XP

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have two Foxconn 661FX7 motherboards and they will not take XP past the 35% setup stage and just hang.
I have tried several things including changing the hard drive, Installation CD, CDROM drives etc but all to the same stage of 35% installation.
Anyone got any ideas?
Tried Foxconn but got nowhere in general, and cannot update the BIOS either.

3 replies

by Former member

I had the same problem i solved them by upping the ram to 3gb (or 2gb if money is scarce)then downloaded http://www.ubuntu.com/ and installed this on my harddrive then rebooted then loaded on winxp. Hope this helps you. Repost if you have anymore problems.

by karibarite

I have now managed to download the BIOS update, and using the AWDflash 8.63 ran the command :-
awdflash 567f1p39.bin /py/sn/cc/R/LD and no change just said Flash write protected.
Checked the Switches for the command and added a /F at the end.
It then began to program the BIOS but at about 98% of the way through it stopped and restarted the PC.
Now BIOS will only run as far as the Updating escD or Updating the DMI.
NOW WHAT ????
Would like to get at least back to the original BIOS which is saved on the floppy or to reflash the BIOS.
ANY HELP GRATEFULLY ACCEPTED

This discussion is closed to new replies.