Full backup solution
XP pro
Can somebody recommend a good software for performing a FULL backup from HD to HD. would prefer to be able to schedule and not have to boot from disc to do backup.
Thanks
Hardware
XP pro
Can somebody recommend a good software for performing a FULL backup from HD to HD. would prefer to be able to schedule and not have to boot from disc to do backup.
Thanks
by snuffy09 Accepted solution
by cmiller5400 Accepted solution
Acronis True Image
Ghost
by oh smeg Accepted solution
by alashhar Accepted solution
by snuffy09 Accepted solution
I cloned my OS Drive to an external using clonezilla. it completed without errors.
After i started windows it says that the external drive is "unreadable" in windows disk manager. Is that normal? or did something get screwed up? cuz it was done with a "linux tool" i guess?
thanks for help
by alashhar Accepted solution
by choppit Accepted solution
by mamies Accepted solution
Part Image is Not Ghost.
This program is free and it copys the partition to another partition even if its on another drive. I use it for when I sysprep my xp build and stick it on a DVD with a few bottable files from the software and it is like a recovery disk where the OS is stored on the DVD itself.
Works really well.
by oh smeg Accepted solution
But normally after you clone any Boot Drive you shut down the system fit the New Drive and see if it boots.
Depending on which version of Windows you are using there may be issues with both Drives having an identical Partition Information on them. When the OS sees 2 Identical Drives it is not uncommon for it to spit the dummy and not read the second one as [b]Computer Logic[/b] insists that this is not possible and there must be something wrong here. ;)
Col
by pshiflet-24 Accepted solution
by snuffy09 Accepted solution
Good idea, but it seems kinda odd it wouldnt work if its not the OS drive i cloned, but whatever i will try disconnecting my internal drive and booting to see if i can view the external data then.
thanks
by ron k. Accepted solution
by oh smeg Accepted solution
As there is a Straight Conflict to begin with. When you clone any HDD/Partition the Partition Headings are the same as the original Disc that this came from and no OS can support 2 devices with the same Designations.
Granted you'll not see this in Windows but at the Hardware Level both drives have the same Stamps so the Partition Information Number and Date that it was created are identical telling the system that they are the same drive. ;)
After you clone any Drive you should shut down the system remove the Original Drive and fit the Clone to see if ti works. Not reboot the system with both the Clone and the Original Disc present.
Col
by snuffy09 Accepted solution
This morning i tried clonezilla again
Didnt have a lot of time so i tried to clone my flash drive to my external.
This time i did everything the same except at the end i selected to shutdown, not restart, then unplugged my flash drive and turned on the computer. I was then able to view all the data on my external that was cloned from my flash drive.
Will try to repeat the process to clone my secondary internal HD.
Thanks everyone for tips!
by snuffy09 Accepted solution
This discussion is closed to new replies.
Sort by Trending