Discussion Locked

Gateway Fedora Motherboards

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
ANy one experiencing problems with Gateway GP7-800 systems using the FEDORA mobo? In the past 3 weeks, I've had the hard drives on 3 systems go bad (3 different HD mfgr); each time I would install the replacement HD, the preloaded Win98 OS would mis-identify the HD controller. It should be an Intel 82815 Ultra ATA/66, but defaults to Standard EIDE. When that happens, the system no longer sees the CD ROM drive. I suspect the common FEDORA mobo in each of these systems. Any ideas?

5 replies

by pbonta

Make sure you are using an Ultra ATA compatible (80 conductor into 40 pin) cable. If you use a standard (40 conductor into 40 pin) IDE cable, the OS will not identify it correctly. Also, are the replacement drives Ultra ATA?

by hiranyaw

Have you loaded the drivers from the cd's that came with the system. the drivers for this controller are not build in to win 98 i have the same system from gateway it even support Ultra ATA/100.

This discussion is closed to new replies.