Discussion Locked

GeForce2 Max 400 and Windows 95

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can only get Windows 95 to run in safe mode coupled with GeForce2 Max400. Is there a way around this - DirectX, IE5 or whatever. Please respond. Have Athlon 1200Hz mainboard

6 replies

by thechas

I am asuming that this is an AGP card.
Windows 95 does not have AGP support built in.

I recommend that you upgrade your OS to at least W98SE.

Then install drivers in the following sequence:
Mother board / chipset drivers (AMD, VIA)
DirectX 8.1
Nvidia driver.

That should take care of the problem.

You might try the above driver sequence in 95, but I am confident that you will not get all of the performance that you paid for until you upgrade your OS.

Don't forget the patch for W95 and systems operating AMD processors over 350MHz.

by pushpudden

Reply was most useful - hope to resolve my problem shortly. I already did the patch for the faster processor.

by timthetoolman

Hi,

I suspect that you have the OSR2 version of Win95 which does support AGP - if you didn't then you wouldn't even be able to get video in safe mode.

I agree with TheChas on the upgrade, Win95 is old and crippled compared to the new OSs, but I would suggest you go straight to WinXP if you have 128Mb memory or more. Your processor is certainly good enough!

If you're keen to try to get it working under Win95, then you should download the latest drivers from nvidia from...

http://www.nvidia.com/view.asp?PAGE=windows9x

(remove spaces from the above URL)

and also the latest BIOS for your motherboard from your motherboard's manufacturer's website.

I suspect it *can* work, but you dont have the right drivers yet.

Cheers,Tim.

by pushpudden

Quite right I do have the OSR2 version. The main reason I want to run Win95 is because some of my games are a bit on the old side and go better on 95. Thanks for your help.

This discussion is closed to new replies.