Discussion Locked

Getting a Floptical Drive to work

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I own an Iomega 21 Mb. Floptical Insider (purchased in 1994), which I have been unable to use, either on a Windows 95-based Pentium or on my current Windows 98-equipped machine.
I took the manufacturer's advice and installed an Adaptec 1515A SCSIcard, which can theoretically accommodate both external and internal peripherals (simultaneously). While I've had no problem getting an external Syquest 230 Mb. drive to work on the card, nothing I've tried seems able to kick start the Floptical drive. Windows just won't see the drive.
Is it a driver problem? Something else. Please help

Peter A. Baptiste

5 replies

by mindcrazy

I would reccomend finding all the info you can about this drive on the net. It maybe a simple jumper setting or possibly you do not have the right driver. Check all the driver sites...windrivers.com , drivershq.com, ect. and find every available driver for that drive and try them all before giving up hope. May also want to search for some legacy hardware sites you may find some good info.

Good Luck

This discussion is closed to new replies.