Discussion Locked

GF2 Pro lockups on a once-stable system.

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I had an ATi Radeon for months in my PC that ran all my games without a hitch. I upgraded to a GeForce2 Pro last night, and it the screen would lockup after 20 min. or so, but the system would still respond (sounds, alt-F4, etc.)

I've installed the v32 4-in-1 Drivers from VIA with the the AGP in Normal Mode. I have the latest Leadtek drivers. I printed Leadtek's suggested BIOS settings and followed them to a T. I have 5 fans in my system and Winfox says my card is "well functioning."

Any ideas? I haven't tried the reference drivers yet, but I don't think that will help much.

FIC AZ11 w/ 750mhz T'Bird
512MB PC133/30GB WD Caviar
GeForce2 Pro/SB Live! X-Gamer

Thanks,
Butch

7 replies

by moebrucker

We support a game that will do some locking with the GeForce2. The solution we have found is to go into the bios and change from 4x to 2x on the agp slot. If you do not have that option, we basically aren't able to get around it.

by reverendzero

I'v already changed the AGP from 4x to 2x and the aperture from 64MB, to 32MB, and now 16MB. Still doing it. Thanks for the tip, though.

by searogue

Hi,

You should try the reference drivers v12x.
Also, the GForce is also problematic with the SB card in some games.

go to http://www.nvidia.com/view.asp?PAGE=drivers
& get the v12.41 drivers for your OS... I have found this to be the most stable version & I play games like Diablo II, Quake2/3, Riven, Nascar4, Unreal Tournament etc.

HTH,

Best Regards,

Tony

by reverendzero

The new drivers helped a great deal. I was skeptical, but they work like a champ! Thanks for the tip. Neat thing is, I can still use the WinFox utilities.

The new drivers stabilized my system, but speed is still an issue. See the next answer...

by berserker

Did you uninstall the previous display driver. Make sure that you have 'Enable IRQ for VGA' in BIOS.

When you install the Via driver in normal mode, it set the AGP to 1X instead of 2x or 4x. Reinstall the Via 4 in 1 in Turbo Mode.
Set your AGPmode in the BIOS as 4x as well after you have install it in Turbo mode.

by reverendzero

The latest drivers helped, but reinstalling the 4-1 in Turbo to match my BIOS eked out some major performance. I never thought to match them. Thanks...

This discussion is closed to new replies.