Discussion Locked
0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My PC has a Mercury 810 chipset mother board. NOw can i upgrade to Voodoo or some other 3D cards using same motherboard
8 replies
by parvus1202
Intel Chipset 810 usually found on Celeron and P111 motherboards with speed of less than 1ghz. So I don't think you want to upgrade to a very high specs 3d cards. A Geforce 2 or 3 is good enough. Ask 3d cards dealer before buying.
by chvssarma
The question was auto-closed by TechRepublic
by cg it
Question. Does your motherboard have an AGP slot? or just PCI slots. If so, you can use todays vid cards. Performance of that vid card will vary depending upon system resources such as CPU speed, physical memory, HDD access rates and data transer rates. You can get a blazing vid card but with a slow processor, inadequate system memory, and a slow data transfer from you HDD, you won't get that blazing vid card to operate at it's full potential. 3dfx, which made the Voodoo line of graphics cards were bought out by NVidia a couple of years ago and no longer exist. Unless you really want one, NVidia and ATI are really the only topline GPU / Vid card makers today.
by cg it
note: a standard 3d vid card today would be a Geforce 3 Ti 200 with 64 MB or memory. There is the ATI Radeon 8500 and 9500 vid cards. nVidia which makes the Geforce line is coming out with a new card [the Geforce FX ]with new technology soon which will bring cinema like graphics to the pc. ATI Radeon line will also have a new card out soon. Check with some of the game mags such as PC gamer for their hardware writeups on vid cards today. Another source if Planethardware or Overclockercafe.
by chvssarma
The question was auto-closed by TechRepublic
by thechas
Just a side note: 3dfx has been out of business for over a year.
So, unless you have one laying around, you may not be able to find a Voodoo card, and should be very cautious about purchasing a Voodoo card.
Once you determine what slot type you have available, Check the minimum system requirements for the cards you are looking at.
You want to have at least 2X the minimum CPU speed that the card requires.
Chas
by chvssarma
The question was auto-closed by TechRepublic
by chvssarma
This question was auto closed due to inactivity
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies