9 replies
by b_pope
if you want IDE try two Maxtor 80GB Diamond Max Plus UATA133 7200rmp drives & attach it to Promise Technologies Ultra133 TX2 adapter card.
You can attach four drives to this card so it still leaves more room to expand.
http://www.promise.com/
You could go with a Raid setup read about them at above link, really depends on your overall needs.
by phoenix1
by shanghai sam
You can also move into the SCSI arena and get RPM's into the 10,000 and 15,000 range. Disk i/o will be one of your largest bottlenecks. A good reference for this is http://www.videoguys.com/system.htm
This site has some good configuration and hardware rating on it. Hope this helps.
Aaron
by phoenix1
by thechas
I agree with Aaron, SCSI is the best way to go for what your looking to do.
Unless you are worried about data loss, I would skip a RAID configuration. RAID improves reliability by maintaining 2 copies of your files. If you need 160GB for data, you will need 320 GB in a true RAID configuration.
You need to consider OS and file format too.
W98 has large drive issues.
FAT 32 and UDMA 100 will limit you to 130GB on a single drive.
If you go with XP, you do not have the FAT32 limits if you use ntsf format. This will also give you some of the RAID benefits without the extra capacity needs. XP also does not have the 511MB/1GB RAM wall that affects W9X.
At the size of your files, I assume that more memory will be a benefit.
by phoenix1
by techkid
If you plan on building a new computer check out this article about the 850 chipset. You won't get what you're paying for if you go with a U160 card and this chipset
http://www.geek.com/news/geeknews/2002jan/bch20020118009852.htm
by phoenix1
by phoenix1
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending