5 replies
by mosese83 Accepted solution
by bizzo Accepted solution
What are the sizes of the HDDs?
Free space before install?
What is the spec of the machine?
Is is the same machine being used for the different HDDs?
by brian Accepted solution
by charles bundy Accepted solution
Assuming the second "good" harddrive is going into the same computer, on the same controller + channel, then it sounds like a harddrive problem, not disk controller.
Try running a SMART utility and check the drive. It sounds like platter damage and the poor thing is busy hashing and moving sectors on the fly to cope with failure. Hence the more you write, the slower it goes.
by rob miners Accepted solution
You can use the Hard Drive Makers Testing Utility to Test the Drive which can be downloaded from below.
Hitachi / IBM
Western Digital
Fujitsu
Seagate
Samsung
If it tests out OK then try this I find it great for rejuvenating old drives.
Darik's Boot and Nuke.
Autonuke should do it by running it at least 3 times.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending