Discussion Locked

hard disk failure

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My hard disk fail and I'm tring to recover the data inside by putting this drive as slave and access it from win2k server ntfs partion but no luck until now , i search for utility to recover data but i don't know which it's better.
can any one tellme how to recover the data from dead drive (not booting) in nt 4.0 enviroment ntfs partition

7 replies

by damjef

providing it is just software failure, my advise would be to slave the drive on another nt 4.0 station, make sure the bios settings are checked,ie;cmos settings pri slave set to auto or user defined 9put the drive info in manually) auto detect to make sure the drive is visible to the system and exit/save settings. after boot you should be able to d&d anything you like. if this fails visit www.dtidata.com. providing your drive hasn't mech failure their software should be able to recover virtually anything for you. hope this helps!

by timthetoolman

Hi,

Download the following article from TechRepublic. If you cant find something from it, I dont like your chances...

"200 ways to revive a hard drive"

Its in the Downloads area as the most popular download of all time!

Cheers,
Tim.

by uch

I suggest you slave it on an NT4.0, preferrably with the CD-ROM. This should enable you access its contents & retrieve your data.

Goodluck.

This discussion is closed to new replies.