Discussion Locked

Hard disk problem

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hey guys, i have a problem with my 30gig seagate hd, it had a bad cluster and i cant boot up in windows, so i used fdisk to remove the partition, when its at 6% i hangs up, so i formatted it and it only formatted 8 gig, then i used scandisk and surface scan, now windows cannot read my hd. what should i do? (just bought it 6 months ago and i cant return it coz i lost my receipt)

6 replies

by dmiles

Does the BIOS support the 30gig hard drive,you may need to flash the BIOS
Insert the startup disk and at command prompt type fdisk /mbr
Now run FDISK,and enable large disk support
Choose to partition the hard drive
Reboot and insert cd-rom and install with cd-rom support,it should do a system and notify you of the bad sectors,it is a long process but it should work
The other option would be to use a third party software such as Norton Disk Doctor or hard drive diagnostic tool from Seegate to fix the bad sectors.

by rexmen72

yes my bios support 30 gig hd. even when booting up, it sees the 30 gig, but when in windows it does not see the hd, but when im in the device manager it it sees the hd? dont know really what the problem is.

by drew_lgca

I have returned drives to seagate without a receipt. Go to there web page and check to see if it is under warranty. If it is request a RMA. If that does not work then go to www.bootdisk.com and download a program to Wipe\ZAP your drive. This program will put all zero. Format and fdisk does not alway wipe all the partition info.

This discussion is closed to new replies.